Yamato PPC-300 страница 4 Скачать руководство пользователя

Страница: 4 / 28

YCO-1125-03-13

PPC-300 & PPC-300D Operation Manual

Welcome to your new Yamato scale. This operation manual provides you with instructions on how to

setup, use and care for the PPC-300 and PPC-300D. More advanced technical specifications, calibra

tion instructions, configuration information and a parts list are available in the PPC-300 & 300D Techni

cal Manual.

Before using the scale, carefully read, understand, and follow the “Safety Precautions” described in this

manual. Observe the advice given in the “Directions for Use” section to ensure proper operation. Keep

this operation manual handy for reference over the entire life of the scale.

Conventions

The following conventions are used in this manual.

Danger :

Warns users about a procedure that could result in serious injury or death if

not performed properly or if ignored.

Warning :

Warns users about a procedure that could result in injury or property damage if not

performed properly or if ignored.

Caution :

Warns users about a procedure that could result in minor injury or damage to the

scale if not performed properly or if ignored.

Indicates an action that must never be performed.

Indicates an action that must always be performed.

Note :

Statements that provide additional information.

Safety Precautions

Danger - To Avoid Electric Shock

Do not step on, or place heavy or edged objects on the AC adapter cord.

Do not disconnect the AC adapter by pulling on the cord. Connect and disconnect the AC adapter

by holding the plastic body of the AC adapter.

Do not connect or disconnect the AC adapter while the adapter body, cord, or your hands are wet.

Do not spray water onto or submerge the scale.

Danger - To Avoid Explosion and Fire

This scale is not an explosion-proof model. Do not use the scale in an atmosphere containing

flammable gases or explosive fumes. A fire or an explosion can result.

I Introduction

Содержание PPC-300





























Результаты поиска

Содержание PPC-300

Отзывы:

Похожие инструкции для PPC-300

Бренды по названию

Популярные бренды

Yamato PPC-300, Руководство по эксплуатации

Результаты поиска

Содержание PPC-300

Отзывы:

Похожие инструкции для PPC-300

Бренды по названию

Популярные бренды