Yamato PDC610, Инструкция по эксплуатации

Страница: 35 / 46

32
9. MAINTENANCE
Periodic Inspection
Conduct the periodic inspections according to the following tables.
Every Month
Date: Temperature:
℃
Humidity:
％
Inspected by:
No. Place Method Criteria Result Remarks
1
Exhaust speed
test Conduct test under
nor-mal operating
conditions.
3 minutes max. from
atmospheric pressure to
13 Pa. If the criteria
are not met
or the oil is
contaminated
, the oil must
be replaced.
2
Ultimate
vacuum test Conduct test under
nor-mal operating
conditions.
10 Pa or below. after 20
minutes of evacuation.
3
Vacuum leak
test
Conduct test under
nor-mal operating
conditions.
+20 Pa max. 20 minutes
after
start from the
ultimate vacuum.
If over 20 Pa,
vacuum may
be leaking.
Note: If the first test did not meet the criteria, a possible cause may be adsorption of water. If the criteria
are not met, conduct the leak test again immediately after the first test.
Every Year
Date: Temperature:
℃
Humidity:
％
Inspected by:
No. Place Method Criteria Result Remarks
1
Retighten
connection
screws All motion at a stop. Not loose.
2
Retighten
piping joints All motion at a stop. Not loose.
3
Replace
O-rings All motion at a stop. No damage or adhesion
of foreign matter.
4
Earth leakage
breaker Under the normal
operating conditions.
Turned off when the
breake
r’s red button is
pressed.
5
Emergency
stop button Under the normal
operating conditions.
The pump and operation
panel power is turned off.
Every 4 Years
Date: Temperature:
℃
Humidity:
％
Inspected by:
No. Place Installed on Criteria Result Remarks
1
Battery Programmable controller Replace
every
4
years.
Programmable terminal
2
Backlight Touch panel Correct brightness. Replace
every 40,000
hours.
◆
The intervals of replacing the oil in the vacuum pump largely depend on the conditions of use, but
usually it must be replaced every three to six months.
◆
The recommended intervals of parts replacement as a result of the inspections are for reference. Parts
may be replaced earlier depending on the frequency of use.
◆
If you have any questions, please contact the dealer or Yamato Scientific.