Yamato DKM300C, Руководство пользователя

Страница: 22 / 44

20
4. Operating procedures
Operating procedures (auto stop operation)
This mode automatically stops fixed temperature operation after a certain time from its start set with
the timer.
Procedures for auto stop
operation
STO P
R U N
M EA SU R ED TEM P.
℃
H EATER
R U N
SET TEM P.
TIM ER
SU B M EN U
1. Setting a stop time
1
After confirming the temperature you want is set, press
the TIMER key to display characters AStP
on
the MEASURED TEMP. screen that indicate auto stop
operation.
The set time is displayed on the SET TEMP. screen.
2
Set a duration you want using the
▼ ▲
keys.
Pressing the
▼▲
keys makes the set time blink. The
time is determined when blinking stops.
About the timer function The maximum time that can be set for the timer is 999 hours
50 minutes.
Up to 99 hours 59 minutes, time can be set in minutes.
One hundred hours and over are set only in 10 minutes.
Keep the
▼ ▲
keys pressed to continuously change set
time and you can quickly reach the time you want. Press
the ▼▲ keys once at a time for fine adjustment.
STO P
R U N
M EA SU R ED TEM P.
℃
H EATER
R U N
SET TEM P.
TIM ER
SU B M EN U
2. Starting timer operation
When the time you want is set, press the RUN/STOP key
long while characters AStP
that indicate auto stop
operation are displayed on the MEASURED TEMP. screen
and the set time on the SET TEMP. screen.
The RUN lamp blinks and timer operation is started.
TIMER starts counting when the temperature in the bath
reaches the set temperature.
Once timer counting is started, the SET TEMP. screen
changes to the remaining time display.
STO P
R U N
M EA SU R ED TEM P.
℃
H EATER
R U N
SET TEM P.
TIM ER
SU B M EN U
3. Stopping and ending timer operation
Operation stops automatically when the set temperature
has elapsed.
Characters End
blink on the SET TEMP. screen to
indicate operation has ended.
Press the RUN/STOP key for approx. one second to end
the timer operation mode.
The screen switches to the
initial setting screen.
① ②