YCO-1102-05-02
CPS Series
Operation Manual
Table of Contents
I.
Name and Function of Parts
1
II. Specifications
1
III. Setup
2
Installing the Battery
Setting the Scale Functions
Calibrating the Scale
IV. Directions for Use
4
Turning the Scale On and Off
Low Battery Condition
Zero the Display
Changing Units of Measurement
Gross Weighing
Net Weighing
Batching
Counting
V. Troubleshooting and Error Messages
6
SAFETY INSTRUCTIONS
Before using the scale, carefully read, understand, and follow the “Safety Instructions” described in this manual. Observe the advice given in
the “Operations” section to ensure proper operation. Keep this operation manual handy for reference.
1)
This scale is
not
an explosion-proof model. Do not use the scale in an atmosphere containing flammable gases or explosive fumes. A fire or an explosion can result.
2)
Do not operate the scale if there is smoke or a burnt smell coming from the scale. Remove the batteries immediately. After making sure that there is no danger, consult your dealer.
Never try to repair the scale by yourself.
3)
Never step on or sit on the scale. Not only will the scale be damaged, but you may also be injured.
4)
Place the item to be weighed in the center of the platform. Items placed on the edge of the platform may fall off and cause injury.
5)
When weighing a heavy, large or unbalanced item, make sure the item is stable on the platform, otherwise, an accident may occur.
6)
When carrying or moving the scale, be sure to hold it by the bottom of the base. If you hold it by the flip top, the flip top may become detached causing the scale to fall. This will
damage the scale.
7)
Do not insert your finger into the gap or holes in the scale. You may be injured.
To prevent damage to the scale
1)
Do not push the indicator or keys with sharp objects. They may break or puncture the switch membrane panel.
2)
Use the specified power supply and choose a suitable environment. If you do not, the weight readings may be inaccurate and the scale may be damaged.
3)
The scale is a sensitive weighing instrument, avoid physical shocks. If you drop something on the scale, step on the platform, or drop it, the scale may be damaged and lose
accuracy.
4)
If the scale becomes dirty, wipe it with a soft cloth. For stubborn stains, apply a little neutral detergent and then wipe the scale with a dry cloth. Do not use thinner, benzene, hot
water, or chemical agents on non-metallic parts, all of which can cause deformation, discoloration, or deterioration.
5)
Never remove the case. The fine adjustment section may be damaged and you may be injured by sharp edges on the internal parts.
6)
Do not place the scale upside down.
7)
When the low battery indicator appears, replace all of the batteries. If the scale will not be used for a long period, remove the batteries.
To keep the scale working efficiently
1)
Place the scale on a flat stable surface that will support the scale and the load.
2)
Do not place the scale in an area exposed to direct sunlight or to wind currents from an air conditioner, otherwise, the weights will not be accurate.
3)
Do not place the scale near machines that create vibrations or electromagnetic disturbance, such as microwave ovens, portable phones, or large motors. This will affect the accuracy.
4)
The operating temperature range is from 10°C to 35°C (50°F to 95°F). Do not subject the scale to sudden temperature changes; allow the scale to adjust to the new temperature
before use.
5)
This scale is not waterproof or dustproof. Do not expose the scale to splashing water. Do not install the scale in an extremely humid or dusty environment.
6)
Do not disassemble or modify the scale, you will void the warranty.
