Yamatake SDC35, Руководство пользователя

Страница: 261 / 280

Chapter 13. SPECIFICATIONS
13-1
■
Specifications
●
PV input
Thermocouple: K,J,E,T,R,S,B,N (JIS C1602-1995)
PL II (Engelhard Industries Data (ITS90))
WRe5-26 (ASTM E988-96(Reapproved 2002))
Ni-NiMo (ASTM E1751-00)
PR40-20 (Johnson Matthey Data)
DIN U,DIN L (DIN 43710-1985)
Gold iron chromel (Hayashidenko Data)
Resistance temperature detector (RTD):
Pt100 (JIS C1604-1997)
JPt100 (JIS C1604-1989)
DC voltage: 0 to 10mV, -10 to +10mV, 0 to 100mV,
0 to 1V, 1 to 5V, 0 to 5V, 0 to 10V
DC current: 0 to 20mA, 4 to 20mA
Selection of input type:A desired type can be selected (full-multi range).
Sampling cycle time:
0.1s
Indication accuracy: ±0.1%FS±1 digit, ±0.2%FS±1digit in the negative area of the
thermocouple (Specified by the input conversion at an ambient
temperature of 23±2˚C)
However, the following ranges have different values:
• Sensor type B (range 17):
±4%FS at 260˚C or less, ±0.4%FS at 260 to 800˚C, ±0.2%FS at 800
to 1800˚C
The low limit for indication is 20˚C. However, if ROM version 1 of
the instrument information bank (
Id02
) is prior to 2.04, the low limit
for indication is -180˚C.
• Sensor type R (range 15), sensor type S (range 16):
±0.2%FS at 100˚C or less, ±0.15%FS at 100 to 1600˚C
• Sensor type PR40-20 (range 23):
±2.5%FS at 0 to 300˚C, ±1.5%FS at 300 to 800˚C, ±0.5%FS at 800
to 1900˚C
• Sensor type golden iron chromel (range 26): ±1.5K
• Sensor type Pt, JPt (RTD) (range 55 to 62): ±0.15%FS
• Sensor type 0 to 10mV (DC voltage) (range 81): ±0.15%FS
Cold junction
compensation
accuracy: ±0.5˚C (at an ambient temperature of 23±2˚C)
±1.0˚C (at an ambient temperature of 15 to 35˚C)
±1.5˚C (at an ambient temperature of 0 to 15˚C or 35 to 50˚C)
Cold junction
compensation method: Compensation inside or outside (only at 0˚C) the measuring instrument
can be selected.
PV bias: -1999 to +9999 or -199.9 to +999.9
• Thermocouple (T/C) input
Input bias current: +0.2µA (flows from terminal A.)
Burnout indication: U AL01
Diameter of the applicable
thermocouple or
compensating wire: 0.3 to 0.65mm