Yamatake SDC35, Руководство пользователя

Страница: 114 / 280

5 - 8 Internal Event
5-56
The result of the internal event process can be output to the control output or event output through the digital
output (DO) process.
For details, refer to ;
2-1, Input/Output Configuration (on page 2-1) .
The following shows the functional block diagram of the internal event:
Handling Precautions
Even though eight internal events 1 to 8 are provided, the number of event
outputs determined by the optional model is 0 to 3 points. With the default
settings before shipment, the operations of internal events 1 to 3 can be
output to event outputs 1 to 3. To utilize the operations of internal events 4
to 8, it is absolutely necessary to set the DO Assignment.
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
Operation type
(Setting: Event Configuration
Operation type E1. C1 to E8. C1)
Direct/reverse, Standby
(Setting: Event Configuration,
Direct/reverse, Standby E1. C2 to E8. C2)
Controller alarm OR/AND
(Setting: Event Configuration
E1.C3 to E8.C3)
EVENT state at READY
(Setting: Event Configuration
E1.C2 to E8.C2)
Main setting, sub setting,
hysteresis, special OFF setup
(Setting: Event E1 to E8, E1.SB to E8.SB,
E1.HY to E8.HY, Event Configuration
E1.C3 to E8.C3)
ON delay, OFF delay, Delay time unit
(Setting: Event E1.on to E8.on,
E1.oF to E8.oF.
Event Configuration E1.C3 to E8.C3)
Internal Event status