Periodic maintenance and adjustment
7-28
1
2
3
4
5
6
7
8
9
10
11
12
13
14
EAUT5041
Replacing the fuses
Main fuse
The main fuse is located behind panel
A. (See page 7-7.)
If the main fuse is blown, replace it as
follows.
1. Turn the key to “OFF”.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
3. Turn the key to “ON” to check if the
vehicle operates normally. If the
main fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
4. After removing and installing the
main fuse, turn the main switch
from “ON” to “OFF” three times in
three-second intervals to initialize
the idle speed control system.
Fuse box
The fuse box, which contains the fuses
for the ignition, signal, and headlights,
as well as the back-up fuse for the
multi-function meter unit, is located be-
hind the headlights. Have a Yamaha
dealer check and replace these fuses if
necessary.
1. Main fuse
Specified fuses:
Main fuse:
20.0 A
1
Specified fuses:
Headlight fuse:
10.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
7.5 A
Backup fuse:
7.5 A
BC9-9-14E0.book 28 ページ 2019年5月8日 水曜日 午後1時22分
Содержание ZUMA 125
Страница 92: ...BC9 9 14E0 book 3 ページ 2019年5月8日 水曜日 午後1時22分 ...
Страница 93: ...BC9 9 14E0 book 4 ページ 2019年5月8日 水曜日 午後1時22分 ...
Страница 94: ...BC9 9 14E0 book 4 ページ 2019年5月8日 水曜日 午後1時22分 ...