Instrument an
d
control functions
5-14
5
ments of 500 r/min. From 13000 r/min
to 18000 r/min, the shift light can be set
in increments of 200 r/min.
1. Push the “RESET” button to set
the activation point engine speed.
2. Push the “SELECT” button to con-
firm the setting. The control mode
changes to the shift light deactiva-
tion point setting function.
To set the shift light deactivation point
TIP
The deactivation range is the same as
the activation range. However, be sure
to set the deactivation point to a higher
engine speed than the activation point,
otherwise the shift light will not come
on.
1. Push the “RESET” button to set
the deactivation point engine
speed.
2. Push the “SELECT” button to con-
firm the setting. The control mode
changes to the shift light bright-
ness function.
To adjust the shift light brightness
1. Push the “RESET” button to set
the shift light brightness level.
2. Push the “SELECT” button to con-
firm the setting and exit the dis-
play brightness and shift light
control mode.
EAU12822
Clutch lever
The clutch lever is located on the left
side of the handlebar. To disengage
the clutch, pull the lever toward the
handlebar grip. To engage the clutch,
release the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
5-28.)
1. Clutch lever
1
UBN611E0.book Page 14 Wednesday, August 30, 2017 2:47 PM