Instrument an
d
control functions
5-3
5
EAU79871
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
TIP
When the switch is set to low beam,
only the left headlight comes on.
EAU66040
Turn si
g
nal switch “
/
”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “
”. When
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU66030
Horn switch “
”
Press this switch to sound the horn.
EAU73961
Traction control system switch
“TCS”
See page 4-2 for an explanation of the
traction control system.
EAU77450
En
g
ine stop switch “
/
”
Set this switch to “
” before starting
the engine. Set this switch to “
” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU79890
Start switch “
”
Push this switch to crank the engine
with the starter.
See page 7-2 for starting instructions
prior to starting the engine.
EAU73931
Drive mo
d
e switch “MODE”
See page 4-1 for an explanation of the
drive mode.
UBN611E0.book Page 3 Wednesday, August 30, 2017 2:47 PM