manualshive.com logo in svg

Yamaha YZF-R1, Руководство по обслуживанию

Поделиться
Скачать
Yamaha YZF-R1 Скачать руководство пользователя страница 235

HANDLEBARS

4-86

EAS30203

REMOVING THE HANDLEBARS

1. Stand the vehicle on a level surface.

WARNING

EWA13120

Securely support the vehicle so that there is 
no danger of it falling over.

2. Remove:

• Handlebar grip “1”

TIP

Blow compressed air between the left handlebar 
and the handlebar grip, and gradually push the 
grip off the handlebar.

EAS30204

CHECKING THE HANDLEBARS

1. Check:

• Handlebar (left) 
• Handlebar (right) 

Bends/cracks/damage 

→

 Replace.

WARNING

EWA13690

Do not attempt to straighten a bent handle-
bar as this may dangerously weaken it.

EAS30205

INSTALLING THE HANDLEBARS

1. Stand the vehicle on a level surface.

WARNING

EWA13120

Securely support the vehicle so that there is 
no danger of it falling over.

2. Install:

• Handlebar (left)
• Handlebar (right)
• Upper bracket

3. Install:

• Main switch cover “1”

TIP

• Pass the main switch cover “1” between the 

projection “a” of the upper bracket and main 
switch “b”, and hook the hook on one end of the 
main switch cover into the hole on the other 
end.

• Make sure that the main switch cover “1” cov-

ers the main switch bolt head “c”.

• The main switch cover may be facing in any di-

rection.

4. Install:

• Handlebar switch (right)
• Throttle grip
• Grip end (right)

a. Fit the slot “a” in the throttle grip “1” into the 

projection “b” in the handlebar switch 
(right, front side) “2” and the throttle grip 
“1” onto the handlebar “3”.

1

G088916

T

 

R

.

.

 

Steering stem nut

115 N·m (11.5 kgf·m, 85 lb·ft)

Upper bracket pinch bolt

26 N·m (2.6 kgf·m, 19 lb·ft)

Handlebar bolt

7 N·m (0.7 kgf·m, 5.2 lb·ft)

Handlebar pinch bolt

32 N·m (3.2 kgf·m, 24 lb·ft)

T

 

R

.

.

 

Handlebar switch screw

3.5 N·m (0.35 kgf·m, 2.6 lb·ft)

Grip end bolt

3.8 N·m (0.38 kgf·m, 2.8 lb·ft)

c

1

a

b

Содержание YZF-R1









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды