Yamaha YZ65, Руководство пользователя

Страница: 46 / 92

Operation an d important ri d in g points
6-1
6
EAU15952
Read the Owner’s Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWA10272
Failure to familiarize yourself with
the controls can lea
d to loss of con-
trol, which coul d cause an acci d ent
or injury.
EAU41506
En g ine b reak-in
WARNING
EWA10322
Failure to properly maintain the vehi-
cle or performin
g maintenance ac-
tivities incorrectly may increase
your risk of injury or
d eath d urin g
service or while usin g the vehicle. If
you are not familiar with vehicle ser-
vice, have a Yamaha
d ealer perform
service.
TIP
Before starting the engine for the first
time, the air filter must be lubricated.
(See page 7-10.)
En g ine b reak-in proce d ure
1. Fill the fuel tank with a break-in oil-
fuel mixture as follows.
2. Start and warm up the engine.
Check the operation of the con-
trols and the engine stop switch.
(See page 4-1.)
3. Operate the motorcycle in the low-
er gears at moderate throttle
openings for 5 to 8 minutes. Stop
the engine and check the spark
plug condition (see page 7-6); it
will show a rich condition during
break-in.
4. Allow the engine to cool. Restart
the engine and operate the motor-
cycle as in the step above for 5 mi-
nutes. Then, very briefly shift to
Recommen d e d 2-stroke en g ine oil:
YAMALUBE 2R
Mixin g ratio ( g asoline to oil):
15:1
UBR881E0.book Page 1 Tuesday, April 2, 2019 9:44 AM