4-5
4
NOTICE
ECB02040
The engine may overheat if the vehicle is
overloaded. If this happens, reduce the
load to specification.
After restarting, make sure that the
warning light is out. Continuous use
while this warning light is on may cause
damage to the engine.
EBU31341
Engine trouble warning light “
”
This warning light comes on or flashes if a
problem is detected in the electrical circuit
monitoring the engine. When this occurs, the
display will indicate an error code (see page
4-18). Have a Yamaha dealer check the self-
diagnosis system.
The electrical circuit of the warning light can
be checked by turning the key to “
” (on). If
the warning light does not come on initially
when the key is turned to “
” (on), or if the
warning light remains on, have a Yamaha
dealer check the vehicle.
EBU33041
Electric Power Steering warning light
“EPS”
This warning light comes on when the key is
turned to “
” (on), and then goes off once
the engine is started. If the warning light re-
mains on or comes on after the engine is
started, the EPS system may not be working
correctly. When this occurs, have a Yamaha
dealer check the EPS system.
The electrical circuit of the warning light can
be checked by turning the key to “
” (on). If
the warning light does not come on, have a
Yamaha dealer check the electrical circuit.
UB5712E0.book Page 5 Friday, October 21, 2016 10:19 AM
