8-34
8
6. Check the oil filler bolt gasket for dam-
age, and replace it if necessary.
7. Install the differential gear oil filler bolt
and its gasket, and then tighten the bolt
to the specified torque.
8. Check for oil leakage. If oil leakage is
found, check for the cause.
EBU35110
Coolant
Check the coolant level prior to each time you
operate the vehicle, and have a Yamaha deal-
er change the coolant every two years.
Checking the coolant level
1. Park the vehicle on a level surface.
2. Remove the hood. (See page 8-10.)
3. Check the coolant level when the engine
is cold (the coolant level will vary with en-
gine temperature).
TIP
The coolant level in the coolant reservoir
should be between the minimum and maxi-
mum level marks.
4. If the coolant level is at or below the mini-
mum level mark, remove the coolant res-
ervoir cap and add coolant to the
Tightening torque:
Differential gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
1. Coolant reservoir cap
2. Maximum level mark
3. Minimum level mark
1
3
2
UB5712E0.book Page 34 Friday, October 21, 2016 10:19 AM
