Yamaha YXZ 1000R 2021, Руководство пользователя

Страница: 177 / 206

9-61
9
3. Install the battery holding plate by install-
ing the bolts.
4. Install the panel.
TIP

Make sure the battery leads are installed as
shown.

Fully charge the battery before installing it.
EBU35244
Jump-starting
Jump-starting the vehicle should be avoided.
The battery should be removed and charged
instead.
WARNING
EWB03430
To avoid battery explosion and/or serious
damage to the electrical system:

Do not connect the negative lead of the
jumper cable to the negative terminal of
the battery.

Do not touch the positive lead of the
jumper cable to the negative lead.

Do not reverse the polarity of the jumper
cables when connecting to the batteries.
However, if the vehicle must be jump-started,
proceed as follows.
1. Turn the key to “ ” (off).
2. Remove panel A. (See page 9-10.)
3. Remove the passenger seat cushion.
(See page 5-21.)
1. Positive battery lead (red)
2. Negative battery lead (black)
3. Battery
1
2
3
UB5J12E0.book Page 61 Monday, December 14, 2020 11:51 AM