Yamaha YST-M45D, Руководство пользователя

Страница: 6 / 15

E-
2
Controls & Connectors
1
VOLUME control
Allows you to adjust the volume level of the entire
speaker system.
Rotating the control clockwise will increase the
volume level, and rotating the control counter-
clockwise will decrease the level.
2
(standby/on) button/indicator
Press this button to turn on the power to the
speaker system. Its indicator lights up. Press the
button again to set the speaker system to standby
mode. Before pressing this button, make sure that
the VOLUME control setting is lowered. A small
electrical current flows through the speaker system
even if the standby/on button is turned off.
3
BASS control
Allows you to adjust the volume level of the low
range.
Rotating the control clockwise will increase the
volume level, and rotating the control counter-
clockwise will decrease the level.
4
TREBLE control
Allows you to adjust the volume level of the high
range.
Rotating the control clockwise will increase the
volume level, and rotating the control counter-
clockwise will decrease the level.
5
3D SURROUND switch
Turn this switch on to add 3D surround sound to
the stereo source sound.
Press the switch to turn on the surround effect.
Press it again to turn off the effect. This setting
does not simulate the surround effect through the
headphones.
6
Headphone jack
Connect a pair of stereo headphones here to moni-
tor the sound. When you connect the headphones,
the speakers will not output sound.
7
INPUT 1/2
You can input two audio sources to the speaker
system from these input jacks simultaneously. For
example, you can connect the output of a CD
player and a personal computer here. The two
audio sources are mixed together by the speaker
system.
8
TO LEFT SPEAKER (on the right speaker)
Use the RCA pin plug cable to connect this jack to
the
B
TO RIGHT SPEAKER jack on the right
speaker to this connector.
9
OUTPUT (ADJ. VOL)
Use a 3.5mm stereo mini plug cable to connect this
jack to a subwoofer to reinforce the low range.
0
USB INPUT
Use the included USB cable to connect this port to
the USB port on the computer.
Signals input from both
7
INPUT 1 (or 2) jack and
USB INPUT jack simultaneously will be mixed
together.
A
DC connector
Connect the included AC adaptor to this connector.
Press the
(standby/on) button on the right
speaker to turn the power on or standby.
B
TO RIGHT SPEAKER (on the left speaker)
Use the RCA pin plug cable to connect this jack to
the
8
TO LEFT SPEAKER jack on the right
speaker to this connector.
2 3 4 5 B
6
Front Rear
8
7
9
0
A
1
(Right speaker) (Right speaker) (Left speaker)
VOLUME
BASS TREBLE 3D SURROUND
TO LEFT
SPEAKER
INPUT 2
INPUT 1
OUTPUT
(ADJ.VOL)
DC 15V
USB
INPUT
TO RIGHT
SPEAKER