Yamaha YSP-5600BMK2 страница 75 Скачать руководство пользователя

Страница: 75 / 110

SETTINGS

➤

Setup menu

Adjust this unit’s dynamic range (difference between maximum and minimum volumes).

Settings

• “Adaptive DRC” is automatically set to “Off” when the settings other than “Max” is selected.

Configure the DTS decoder for use with input of DTS audio signals.

❑

Neural:X

Specify whether or not Neural:X is used to generate channels not present in input
sources.

Settings

• Neural:X is the DTS:X surround sound decoder.

❑

Dialog Control

Increase the volume of dialog to make listening easier.

Adjustable range

0 (default) to 6 (dB)

• This setting is effective only for playback of DTS:X input sources that support dialog control.

Dynamic Range

Setup Menu

➜

Sound

➜

Dynamic Range

Min/Auto

Min: Sets dynamic range at a level that supports comfortable listening at low
volumes.
Auto: Sets dynamic range in accordance with information received from input
signal.

Standard

The dynamic range recommended for regular home use.

Max (default)

Outputs sound without adjusting the dynamic range of the input signals.

DTS

Setup Menu

➜

Sound

➜

DTS

Disable

Neural:X will not be used.

Enable (default)

Neural:X will be used.

“Neural:X” and “Dialog Control” may be provided with a firmware update.
See our website for the latest information.

The following settings are available for the DTS decoder before “Neural:X”
and “Dialog Control” are provided with firmware update.

Configure the DTS Neo:6 decoder for use when DTS audio signals are input.

Settings

• The DTS Neo:6 decoder is disabled with stereo playback and target playback.

Neo:6 Cinema
(default)

Use the DTS Neo:6 decoder suitable for movies.

Neo:6 Music

Use the DTS Neo:6 decoder suitable for music.

Содержание YSP-5600BMK2















































































































Результаты поиска

Содержание YSP-5600BMK2

Отзывы:

Похожие инструкции для YSP-5600BMK2

Бренды по названию

Популярные бренды

Yamaha YSP-5600BMK2, Руководство пользователя

Результаты поиска

Содержание YSP-5600BMK2

Отзывы:

Похожие инструкции для YSP-5600BMK2

Бренды по названию

Популярные бренды