86
En
MANUAL SETUP
■
IMAGE LOCATION (Image location)
Use to adjust the direction from which the front left and
right channel sound is heard so that each sound can be
heard closer to the center channel.
Use this feature to redirect audio signals if the sound
coming from the front left and right channels seems
unnatural, such as when your listening position is not the
center of your listening room.
You can only adjust this parameter when 3 Beam or 5
Beam is selected as the beam mode (see page 60).
Choices: ON,
OFF
Setting range: 0% to 95%
Initial setting: 0%
LEFT (Left)
Adjusts audio signals toward the left.
The higher the percentage, the louder the output from the
center.
RIGHT (Right)
Adjusts audio signals toward the right.
The higher the percentage, the louder the output from the
center.
Use to manually adjust the various parameters related to
the sound output.
SET MENU
→
MANUAL SETUP
→
SOUND MENU
■
TONE CONTROL (Tone control)
You can adjust the tonal quality of sound beams.
TREBLE (Treble)
Use to adjust the high-frequency response.
Choices: –12 dB to +12 dB
Initial setting: 0 dB
BASS (Bass)
Use to adjust the low-frequency response.
Choices: –12 dB to +12 dB
Initial setting: 0 dB
■
SUBWOOFER SET (Subwoofer settings)
Use to manually adjust the various subwoofer
settings.
p
OFF
)
ON
L
C
R
LEFT
;;;;;;;;;;;
0%
RIGHT
;;;;;;;;;;
0%
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
C)IMAGE LOCATION
p
p
.
p
p
Without adjustment
With the front left
channel adjusted
Without adjustment
With the front right
channel adjusted
SOUND MENU
A)TONE CONTROL
B)SUBWOOFER SET
C)MUTE LEVEL
D)AUDIO DELAY
E)ROOM EQ
F)DD/DTS Dynamic Range
G)TruBass
[ ]/[ ]:Up/Down
[ENTER]:Enter
1)SOUND MENU
.
p
p
-
+
TREBLE
;;;;;
0dB
-
+
BASS
;;;;;;;
0dB
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
A)TONE CONTROL
p
p
.
p
p
------
------
BASS OUT
;;;;;
FRONT
CROSS OVER
;;;
100Hz
LFE LEVEL
;;;;;;
0dB
DISTANCE
;;;;;;
3.0m
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
B)SUBWOOFER SET
p
p
p
p
.
