Yamaha YSP-2700 Скачать руководство пользователя страница 19

Страница: 19 / 114

PREPARATIONS

➤

Installation

If your TV is mounted on a wall, the optional Wall Mount Bracket SPM-K20 can be used
to mount this unit on the wall under the TV.

See “Dimensions” (p. 22) for this unit and SPM-K20 dimensions.

• Be sure to read “SAFETY INSTRUCTIONS” in the Installation Manual supplied with the SPM-K20 before

mounting it.

• The template and screws supplied with the SPM-K20 are not used with this unit.

• SPM-K20 may not be available in some countries or regions.

• Space between this unit and the wall is limited. Therefore, use of a flexible HDMI cable, or right-angle

connector, (neither supplied) is strongly recommended.

❑

Mounting the SPM-K20

Be sure that there is enough space on the wall to mount the wall mount bracket and this
unit. Follow the instructions below to mount both.

Attach the three supplied pads to the wall mount bracket as shown in
the illustration.

Mounting the center unit on a wall

YSP-CU2700

SPM-K20

20.2 mm

37.4 mm

Flexible HDMI cable or

right-angle connector

Follow instructions provided from this page through page 22.

1 2 3 4 5 6

Содержание YSP-2700



















































































































Результаты поиска

Содержание YSP-2700

Отзывы:

Похожие инструкции для YSP-2700

Бренды по названию

Популярные бренды

Yamaha YSP-2700, Руководство пользователя

Результаты поиска

Содержание YSP-2700

Отзывы:

Похожие инструкции для YSP-2700

Бренды по названию

Популярные бренды