29
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
YPP-100
F3.5: 1st Voice Effect Depth
.............................................................................................................
F3.6: 2nd Voice Effect Depth
...........................................................................................................
These functions make it possible to individually set the depth of the effect for the 1st and
2nd dual-mode Voices (“1st” and “2nd” is explained on page 17). Use the [–/NO] and
[+/YES] buttons to set the effect depth for the corresponding voice as required. The depth
range is from 0 through 20. A setting of “0” produces no effect, while a setting of “20” pro-
duces maximum effect depth. Press the [–/NO] and [+/YES] buttons simultaneously to recall
the default setting (different for each voice combination).
• The effect depth settings cannot be changed unless the EFFECT is ON. The Function mode must be
exited before EFFECT can be turned ON.
F3.7: Reset
..........................................................................................................................................................
This function resets all dual-mode functions to their default values. Press the [+/YES]
button to reset the values. “
End
” will appear on the display when all functions have been
reset.
This function sets the footswitch connected to the SOFT jack for normal soft pedal opera-
tion or for song start/stop operation. Use the [–/NO] or [+/YES] buttons to select the desired
soft pedal mode. “1” engages the normal soft pedal mode, and “2” engages the start/stop
mode. When the start/stop mode is engaged, the footswitch connected to the SOFT jack
functions in the same way as the SONG [START/STOP] button on the panel.
Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting of “1”.
F4
Soft Pedal Mode
The volume of the metronome sound can be changed. After selecting “
F5
”, use the [–/NO]
and [+/YES] buttons to set the metronome volume as required. The volume range is from 1
through 20. A setting of “1” produces minimum sound, while a setting of “20” produces
maximum metronome volume. Press the [–/NO] and [+/YES] buttons simultaneously to recall
the default setting “10”.
F5
Metronome Volume
■
SHORTCUT: You can jump directly to the metronome functions by pressing the [FUNC-
TION] button while holding the METRONOME [START/STOP] button.
The Function Mode
F6
Preset Song Part Cancel Volume
This function sets the volume at which a “canceled” part is played during preset song
playback (see page 16 for information on the “part-cancel” function). Use the [–/NO] and
[+/YES] buttons to set the volume as required. The volume range is from 0 through 20. A
setting of “0” produces no sound, while a setting of “20” produces maximum volume. Press
the [–/NO] and [+/YES] buttons simultaneously to recall the default setting “5”.
Adjust the part volume to a comfortable level to use the “canceled” part as a guide to play
along with. Set to “0” if you don’t want to hear the part.
Содержание YPP-100 Light Piano
Страница 1: ......
