Yamaha YK250XGC, Руководство по установке

Страница: 37 / 96

Intr
oduction
i
Before using the robot (Be sure to read the following notes.)
Thank you for purchasing YAMAHA SCARA ROBOT YK-XGC(P) series.
This manual describes only the points that are different from the standard models.
For details about other explanations, see the Installation Manual and Maintenance Manual for YK-XG series
standard models.
If the Z-axis spline vibrates. 1.
The Z-axis spline of the YK250XGC(P), YK350XGC(P), YK400XGC(P), YK500XGLC(P), and YK600XGLC(P) tends to
vibrate in a Z-axis operation speed range of 20% to 40%. If the Z-axis spline vibrates, operate it beyond this operation
speed range.
If the machine harness projects toward the base rear side. 2.
In the YK250XGC(P), YK350XGC(P), YK400XGC(P), YK500XGLC(P), and YK600XGLC(P), the machine harness may
project toward the base rear side according to the arm position.
The maximum projection amount is described in "1.2 External view and dimensions" in Chapter 5. So, refer to this
section for further information.
Projection of the machine harness toward the base rear side (Example: YK250XGC(P))
100 150 56
117
Projection amount
Machine harness
150
661
809
839
689
614
↓ F
246
428
510
632 ±10
Maximum 660 during arm rotation
Maximum 240
during arm rotation
167
202
221
4
Z-axis upper end mechanical stopper position
Z-axis rises by 4mm during return-to-origin.
Z-axis lower end mechanical stopper position
150
10
10
0
54.5 ±2
95.5
42
A
A
4
φ
38
φ
70 User tool
installation
range
120
133
φ 90
173
234
264
0
φ 16 h7
- 0.018
0
51
43
48
283
57
23001-HM-00
if there is an interference object on the base rear side, be sure to keep a sufficient space.