Yamaha YFM7RD, Руководство пользователя

Страница: 47 / 162

4-19
4
WARNING
EWB00410
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and un-
derstand the following information before han-
dling the shock absorber assemblies.
● Do not tamper with or attempt to open the
cylinder assemblies.
● Do not subject the shock absorber assem-
blies to an open flame or other high heat
source. This may cause the unit to explode
due to excessive gas pressure.
● Do not deform or damage the cylinders in
any way. Cylinder damage will result in poor
damping performance.
● Do not dispose of a damaged or worn out
shock absorber assembly yourself. Take the
shock absorber assembly to a Yamaha deal-
er for any service.
EBU19044
Adjusting the rear shock absorber as-
sembly (YFM7RD/YFM700RD)
The spring preload can be adjusted to suit the rid-
er’s weight and the riding conditions.
NOTICE
ECB01090
Never turn the adjusting mechanism beyond
the minimum and maximum settings.
Adjust the spring preload as follows.
1. Loosen the locknut.
2. Turn the spring preload adjusting nut in direc-
tion (a) to increase the spring preload and
thereby harden the suspension, and in direc-
tion (b) to decrease the spring preload and
thereby soften the suspension.
Compression damping setting (for slow com-
pression damping):
Minimum (soft):
16 click(s) in direction (b)*
Standard:
10 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned in di-
rection (a)
U1PE60E0.book Page 19 Friday, March 2, 2012 1:22 PM