background image

6-1

6

EBU19203

PRE-OPERATION CHECKS

EBU19226

Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always
follow the inspection and maintenance procedures and schedules described in the Owner’s Manual.

WARNING

EWB00482

Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equip-
ment damage. Do not operate the vehicle if you find any problem. If a problem cannot be corrected
by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer.

 

Before using this vehicle, check the following points:

ITEM

ROUTINE

PAGE

Fuel

• Check fuel level in fuel tank, and add recommended fuel if neces-

sary.

• Check fuel line for leakage. Correct if necessary.

5-10, 6-4

Engine oil

• Check oil level in engine oil tank, and add recommended oil to 

specified level if necessary.

• Check ATV for oil leakage. Correct if necessary.

6-4, 9-13

Coolant

• Check coolant level in reservoir, and add recommended coolant to 

specified level if necessary.

• Check cooling system for leakage. Correct if necessary.

6-4, 9-18

UBCX60E0.book  Page 1  Friday, April 19, 2019  9:09 AM

Содержание YFM700R





























































































































































Отзывы: