8-44
8
3. Insert a new bulb into the socket, push it in,
and then turn it clockwise until it stops.
4. Install the lens by installing the screws.
NOTICE:
Do not overtighten the screws,
otherwise the lens may break.
[ECB00701]
EBU25651
Removing a wheel
1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the nuts from the wheel.
5. Remove the wheel.
EBU25661
Installing a wheel
1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
1. Tail/brake light bulb
1. Wheel nut
U1BS63E0.book Page 44 Tuesday, March 13, 2012 11:43 AM
Содержание YFM350R
Страница 12: ...1 2 1 43P 2816R 01 1PD 2811R 00 1 2 U1BS63E0 book Page 2 Tuesday March 13 2012 11 43 AM ...
Страница 17: ...1 7 1 For Oceania 1 2 4 3 5 U1BS63E0 book Page 7 Tuesday March 13 2012 11 43 AM ...
Страница 59: ...7 1 7 EBU21141 RIDING YOUR ATV U1BS63E0 book Page 1 Tuesday March 13 2012 11 43 AM ...
Страница 137: ...11 2 11 1 Model label U1BS63E0 book Page 2 Tuesday March 13 2012 11 43 AM ...