Yamaha YC Series, Руководство пользователя

Страница: 49 / 76

SETTINGS LIST
YC61 Owner’s Manual
49
Controllers
Function name Description
Bend Lever Mode Switches the operation mode of the Bend Lever.
•
Pitch Bend: Operates as a Pitch Bend controller.
•
Rotary S/F:
Switches between slow and fast for the rotary speaker of the
SPEAKER/AMP Section. Moving the lever in either direction produces the same
effect as pressing the ROTARY SPEAKER [Slow Fast] button.
Default:
Pitch Bend
Pitch Bend
Range Organ Determines the pitch bend range in semitone steps. This can be set individually for
each Voice Section.
Settin g s:
-24 – +0 – +24
Default:
+2
Key A
Key B
Modulation
Lever Assign Determines the function to be assigned to the Modulation Lever.
You can assign Control Change numbers 1 to 119 as well as the USB Audio volume.
Settin g s:
Off, 1 – 63, 65, 67 – 119, USB Audio Volume
Default:
1
Limit Low Determines the lower limit for the Modulation Lever values.
Settin g s: 0 – 127
Default:
0
Limit High Determines the higher limit for the Modulation Lever values.
Settin g s:
0 – 127
Default:
0
P.Mod
Depth Organ Determines the depth of the vibrato effect applied to keyboard notes. This can be set
individually for each Voice Section.
Settin g s:
0 – 127
Default:
10
NOTE
This can be set for the Organ Section only when the FM tone generator organ type (F1 to
F3) is selected.
Key A
Key B
P.Mod
Speed Organ Determines the speed of the vibrato effect applied to keyboard notes. This can be set
individually for each Voice Section.
Settin g s:
+64 – +0 – +63
Default:
+0
NOTE
This can be set for the Organ Section only when the FM tone generator organ type (F1 to
F3) is selected.
Key A
Key B
Foot
Controller 1 Assign Determines the Control Change number to be assigned to a foot controller (sold
separately) connected via the FOOT CONTROLLER [1] jack.
Settin g s:
Off, 1 – 63, 65, 67 – 119, USB Audio Volume
Default:
11 (Expression)
Limit Low Determines the lower limit value for a foot controller (sold separately) connected to
the FOOT CONTROLLER [1] jack.
Settin g s:
0 – 127
Default:
0
Limit High Determines the upper limit value for a foot controller (sold separately) connected to
the FOOT CONTROLLER [1] jack.
Settin g s:
0 – 127
Default:
127