SETTINGS
➤
Initializing the unit
En
32
2
Press the
key on the unit.
The firmware update is complete.
NOTE
• If the firmware update fails, the “Failed to update MusicCast device” message will be displayed by the app,
and the indicator at far right on the unit will flash blue. Press the
key to turn unit off and then on again,
and try updating the firmware again. If the update fails again, check the network connection.
Follow the procedure below to initialize the unit.
1
Turn off the unit.
2
Hold down the
key and press the
key on the unit until all
indicators flash.
CONNECT
Initializing the unit
CONNECT
Glows (initialized)
