PLAYBACK
➤
Listening to the sound from a Bluetooth device
En
16
Listening to the sound from a
Bluetooth
device
Audio from a
Bluetooth
device, such as a mobile device or a digital music player, can be
played over a wireless connection.
NOTE
• Adjust the volume level of the
Bluetooth
device as required.
• When the network standby function (p.30) is enabled, the unit turns on with operation of the
Bluetooth
device.
• Perform
Bluetooth
connection with the device and unit within 10 m (33 ft) of each other.
HINT
• See documentation supplied with your
Bluetooth
device for more information.
1
Press the BLUETOOTH key on the unit’s remote control to select
Bluetooth
as the input source.
The BLUETOOTH indicator on the unit glows.
If a
Bluetooth
device has been connected before, the unit will connect to the last
connected device when the BLUETOOTH key is pressed. Terminate this
connection to connect a new device.
2
Enable the
Bluetooth
function on the
Bluetooth
device.
3
Select “YAS-306 xxxxxx Bluetooth”* in the
Bluetooth
device list on the
device.
* If the unit is registered as a MusicCast-enabled device (p.19), the room name (network name)
is displayed.
If a passkey (PIN) is required, enter the number “0000”.
When the connection is established, the
indicator on the unit glows.
The
indicator or a completion message is displayed on the
Bluetooth
device.
4
Play back a song on the
Bluetooth
device.
Terminating
Bluetooth
connection
Perform one of the following operations to terminate
Bluetooth
connection.
The
indicator on the unit turns off when the connection is terminated.
• Turn off the
Bluetooth
function on the
Bluetooth
device.
• Press the BLUETOOTH key on the unit’s remote control for more than 3
seconds.
• Switch the unit's input source to any input source other than
Bluetooth
.
• Turn off the unit.
Bluetooth
device (such as
a mobile device)
YAS-306 xxxxxx Bluetooth
PIN 0 0 0 0
1
2
3
4
5
6
7
8
9
0
Blue
