Updating the unit’s firmware
New firmware that provides additional features or product
improvements will be released as needed. Firmware can be updated
using the Sound Bar Controller app installed on a mobile device.
n
NOTICE
• Do not operate the unit or disconnect the power cord or network cable during
firmware update.
• If the Internet connection speed is slow, or the unit is connected to the wireless
network, network update may not be possible depending on the condition of the
network connection. Should this occur, try again at a later time.
• For details on update, visit the Yamaha website.
When a new firmware is released, a “NEW” icon is displayed on the
screen of the Sound Bar Controller app. Tap the icon, then follow the on-
screen instructions to update the firmware.
Pairing the center unit and subwoofer
manually
The center unit and subwoofer are automatically connected via wireless
connection the first time the unit is turned on. If the center unit and
subwoofer are not properly connected due to a temporary
communications failure, pair the center unit and subwoofer manually.
n
NOTE
Pairing is the process of having the center unit and subwoofer recognize one another as
connection destinations.
1
Turn off the unit.
2
Press and hold SUBWOOFER (-) for at least five
seconds.
The center unit is turned on and the HDMI indicator flashes.
SUBWOOFER
Flashes
En
42
