Yamaha XVS250 2001, Руководство по обслуживанию

Страница: 60 / 332

3-1
INTRODUCTION/PERIODIC MAINTENANCE/
LUBRIATION INTERVALS
CHK
ADJ
NOTE:
EB300000
PERIODIC CHECKS AND ADJUSTMENTS
INTRODUCTION
This chapter includes all information necessary to perform recommended inspections and adjust-
ments. These preventive maintenance procedures, if followed, will ensure more reliable vehicle opera-
tion and longer service life. The need for costly overhaul work will be greatly reduced. This information
applies to vehicles already in service as well as to new vehicles that are being prepared for sale. All
service technicians should be familiar with this entire chapter.
The annual checks must be performed every year, except if a kilometer-based maintenance
is performed instead.
From 50,000 km, repeat the maintenance intervals starting from 10,000 km.
Items marked with an asterisk should be performed by a Yamaha dealer as they require special
tools, data and technical skills.
EB301000
PERIODIC MAINTENANCE / LUBRICATION INTERVALS
No ITEM CHECKS OR MAINTENANCE JOB
ODOMETER READING ( 1,000 km)
ANNUAL
No. ITEM CHECKS OR MAINTENANCE JOB
1 10 20 30 40
CHECK
1 * Fuel line Check fuel hoses and vacuum hose for cracks or damage.
√ √ √ √ √
2 * Fuel filter Check condition.
√ √
3 Spark plugs
Check condition.
Clean and regap.
√ √
p p g
Replace.
√ √
4 * Valves
Check valve clearance.
Adjust.
√ √ √ √
5 Air filter element
Clean.
√ √
5 Air filter element
Replace.
√ √
6 Clutch
Check operation.
Adjust.
√ √ √ √ √
7 * Front brake
Check operation, fluid level and vehicle for fluid leakage.
√ √ √ √ √ √
7 * Front brake
Replace brake pads. Whenever worn to the limit
8 * Rear brake
Check operation and adjust brake pedal freeplay.
√ √ √ √ √ √
8 * Rear brake
Replace brake shoes. Whenever worn to the limit
9 * Brake hose
Check for cracks or damage.
√ √ √ √ √
9 * Brake hose
Replace. Every 4 years
10 * Wheels
Check runout, spoke tightness and for damage.
Tighten spokes if necessary.
√ √ √ √
11 * Tires
Check tread depth and for damage.
Replace if necessary.
Check air pressure.
Correct if necessary.
√ √ √ √
12 * Wheel bearings Check bearing for looseness or damage.
√ √ √ √
13 * Swingarm
Check operation and for excessive play.
√ √ √ √
13 * Swingarm
Lubricate with molybdenum disulfide grease. Every 50,000 km
14 Drive chain
Check chain slack.
Make sure that the rear wheel is properly aligned.
Clean and lubricate.
Every 1,000 km and after washing
the motorcycle or riding in the rain.
15 * Steering bearings
Check bearing play and steering for roughness.
√ √ √ √ √
15 * Steering bearings
Lubricate with lithium-soap-based grease. Every 20,000 km
16 * Chassis fasteners
Make sure that all nuts, bolts and screws are properly tightened.
√ √ √ √ √
17 Sidestand
Check operation.
Lubricate.
√ √ √ √ √ √
18 * Sidestand switch Check operation.
√ √ √ √ √
19 * Front fork Check operation and for oil leakage.
√ √ √ √
20 *
Rear shock absorber
assemblies
Check operation and shock absorbers for oil leakage.
√ √ √ √
21 * Carburetor
Check starter (choke) operation.
Adjust engine idling speed.
√ √ √ √ √ √
22 Engine oil Change.
√ √ √ √ √ √