PERIODIC MAINTENANCE AND MINOR REPAIR
6-31
6
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU24281
Replacing a turn signal light
bulb or the tail/brake light bulb
1. Remove the lens by removing the
screws.
XVS1100
XVS1100A
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
ECA10680
Do not overtighten the screws, oth-
erwise the lens may break.
1. Do not touch the glass part of the bulb.
1. Screw
1. Screw
1. Screw
U3B820E0.book Page 31 Tuesday, April 12, 2005 9:43 AM
Содержание XVS1100V
Страница 1: ...3B8 28199 20 XVS1100V XVS1100AV OWNER S MANUAL...
Страница 2: ...U3B820E0 book Page 2 Tuesday April 12 2005 9 43 AM...
Страница 93: ...U3B820E0 book Page 3 Tuesday April 12 2005 9 43 AM...
Страница 94: ...PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD PRINTED IN JAPAN 2005 04 0 3 1 CR E...