Yamaha XV250N1 2021, Руководство пользователя

Страница: 62 / 98

Perio d ic maintenance an d a d justment
7-26
7
5. Tighten the locknuts, and then
tighten the axle nut to the speci-
fied torques.
6. Adjust the brake pedal free play.
(See page 7-21.)
WARNING
EWA10661
After a d justin g the b rake pe d al free
play, check the operation of the
b rake li g ht.
7. Make sure that the drive chain
pullers are in the same position,
the drive chain slack is correct,
and the drive chain moves
smoothly.
EAU23018
Cleanin g an d lu b ricatin g the
d rive chain
The drive chain must be cleaned and
lubricated at the intervals specified in
the periodic maintenance and lubrica-
tion chart, otherwise it will quickly wear
out, especially when riding in dusty or
wet areas. Service the drive chain as
follows.
NOTICE
ECA10584
The d rive chain must b e lu b ricate d
after washin g the motorcycle, ri d in g
in the rain or ri d in g in wet areas.
1. Remove all dirt and mud from the
drive chain with a brush or cloth.
TIP
For a thorough cleaning, have a
Yamaha dealer remove the drive chain
and soak it in solvent.
2. Spray Yamaha chain lubricant or
other suitable chain lubricant on
the entire chain, making sure that
all side plates and rollers have
been sufficiently oiled.
1. Axle nut
2. Drive chain puller locknut
3. Drive chain slack adjusting nut
4. Alignment marks
5. Drive chain puller
Ti g htenin g torques:
Drive chain puller locknut:
16 N·m (1.6 kgf·m, 12 lb·ft)
Axle nut:
105 N·m (10.5 kgf·m, 77 lb·ft)
5
4
1
UBJP11E0.book Page 26 Tuesday, June 29, 2021 9:59 AM