INSTRUMENT AND CONTROL FUNCTIONS
4-5
4
If the odometer/tripmeter/clock display
indicates any error codes, note the
code number, and then have a Yamaha
dealer check the vehicle.
NOTICE
ECA11590
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
Brightness control mode
This function allows you to adjust the
brightness of the multi-function meter
unit panel to suit the outside lighting
conditions.
To set the brightness
1. Turn the key to “OFF”.
2. Push and hold the “SELECT”
switch.
3. Turn the key to “ON”, and then re-
lease the “SELECT” switch after
five seconds.
4. Adjust the multi-function meter unit
panel brightness level by pushing
the reset switch.
5. Push the “SELECT” switch.
The odometer/tripmeter/clock dis-
play will return to the prior mode.
EAU1234B
Handlebar switches
Left
1. Multi-function meter unit panel
1. Multi-function meter unit panel
2. Brightness level display
1. Dimmer switch “
/
”
2. Turn signal switch “
/
”
3. Horn switch “
”
1. “SELECT” switch
U29S15E0.book Page 5 Friday, July 20, 2012 1:34 PM