Yamaha XT250D, Руководство пользователя

Страница: 29 / 100

INSTRUMENT AND CONTROL FUNCTIONS
4-10
2
3
4
5
6
7
8
9
2. Place the seat in the original posi-
tion, and then tighten the bolts.
TIP
Make sure that the seat is properly se-
cured before riding.
EAU14282
Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key.
WARNING! Never ride with a
helmet attached to the helmet hold-
er, since the helmet may hit objects,
causing loss of control and possibly
an accident.
[EWA10161]
EAU44773
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
It is recommended to have a Yamaha
dealer adjust the spring preload. How-
ever, if you choose to make this adjust-
ment yourself, obtain a special wrench
at a Yamaha dealer.
NOTICE
ECA10101
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
1. Loosen the locknut.
2. To increase the spring preload and
thereby harden the suspension,
turn the spring preload adjusting
ring in direction (a). To decrease
the spring preload and thereby
soften the suspension, turn the ad-
justing ring in direction (b).
The spring preload setting is deter-
mined by measuring distance A,
shown in the illustration. The short-
er the distance A is, the higher the
1. Seat holder
2. Projection
2
1
1. Helmet holder
2. Unlock.
1
2
1YB-9-10.book 10 ページ ２０１２年３月２７日 火曜日 午前１１時３６分