Yamaha XT250 2021, Руководство пользователя

Страница: 73 / 100

Periodic maintenance and adjustment
7-34
1
2
3
4
5
6
7
8
9
10
11
12
3. Turn the main switch on and turn
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
EAU23818
Replacing the headlight bulb
This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
ECA26690

Do not touch the glass part of
the headlight bulb. Otherwise
the luminosity and the life of the
bulb may be adversely affected.

Thoroughly clean off any dirt,
oil, or fingerprints from the bulb
using a cloth moistened with al-
cohol or thinner.

Do not use a headlight bulb of a
wattage higher than specified.

Do not affix any type of tinted
film or stickers to the headlight
lens.
1. Remove cowling A. (See
page 7-9.)
2. Remove the headlight unit by re-
moving the bolts.
3. Disconnect the headlight coupler,
and then remove the headlight
Specified fuses:
Main fuse:
30.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
10.0 A
Headlight fuse:
15.0 A
Fuel injection system fuse:
10.0 A
1. Do not touch the glass part of the bulb.
1. Bolt
1
B1U-9-13_1.book 34 ページ ２０２２年４月７日 木曜日 午後３時１４分