Periodic maintenance and adjustment
8-37
1
2
3
4
5
6
7
8
9
10
11
12
13
14
EAU77371
Emergency mode
When the smart key is lost, damaged,
or its battery has discharged, the vehi-
cle can still be turned on and the engine
started. You will need a mechanical key
and the smart key system identification
number (see page 3-3). To operate the
vehicle in emergency mode, carry out
the following steps.
TIP
Emergency mode operation will be
cancelled if the respective steps are not
carried out within the time set for each
operation or if the “OFF/LOCK” switch
is pushed.
1. Stop the vehicle in a safe place.
2. Unlock the seat by inserting the
mechanical key into the lock locat-
ed right side of body and turn it
counter clockwise.
3. Open the seat and check that the
trunk light comes on.
4. Push the “ON/
” switch once.
5. Without completely shutting the
seat, raise and lower it three times
within 10 seconds.
TIP
Use the rear storage compartment light
as a guide when raising and lowering
the seat.
The smart key system indicator
light on the speedometer will come
on for three seconds to indicate
the transition to emergency mode.
6. After the smart key system indica-
tor light goes off, use the “
/ ”
switch to enter the identification
number. Refer to the following pro-
cedure on how to input the identifi-
cation number.
7. Inputting the identification number
is done by counting the number of
flashes of the smart key system in-
dicator light.
For example, if the identification
number is 123456:
Push and hold the “
/ ” switch.
The smart key system indicator
light will start to flash.
1. Smart key system indicator light “
”
1. Identification number
1
1
BV1-28199-E0.book 37 ページ ２０１６年１２月１９日 月曜日 午前１１時２５分
