Yamaha WR426F(P), Руководство по эксплуатации для владельца

Страница: 670 / 776

5 - 58
CHAS
SWINGARM
5. Install:
●
Relay arm 1
●
Bolt (relay arm) 2
●
Plain washer 3
●
Nut (relay arm) 4
To swingarm.
NOTE:
●
Apply the molybdenum disulfide grease on
the bolt.
●
Do not tighten the nut yet.
6. Install:
●
Swingarm 1
●
Pivot shaft 2
NOTE:
●
Apply the molybdenum disulfide grease on
the pivot shaft.
●
Insert the pivot shaft from right side.
T
R
.
.
85 Nm (8.5 m · kg, 61 ft · lb)
7. Check:
●
Swingarm side play
a
Free play exists
→
Replace thrust bear-
ing.
●
Swingarm up and down movement
b
Unsmooth movement/binding/rough
spots
→
Grease or replace bearings,
bushes and collars.
8. Install:
●
Bolt (connecting rod) 1
●
Plain washer 2
●
Nut (connecting rod) 3
NOTE:
●
Apply the molybdenum disulfide grease on
the bolt.
●
Do not tighten the nut yet.
9. Install:
●
Bolt (rear shock absorber-relay arm) 1
●
Nut (rear shock absorber-relay arm) 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
T
R .
.
53 Nm (5.3 m · kg, 38 ft · lb)