manualshive.com logo in svg

Yamaha WOLVERINE YXE70WPXH, Руководство пользователя, Страница: 57 / 186

Поделиться
Скачать
Yamaha WOLVERINE YXE70WPXH Скачать руководство пользователя страница 57

4-19

4

EBU33521

Storage compartments

The storage compartments are located under
the multi-function meter, between the driver
seat and the passenger seat, and under the
passenger seat. To access the under-pas-
senger seat storage compartment, remove
the passenger seat cushion (see page 4-15
for more information).

When storing any documents in the storage
compartments, be sure to wrap them in a
plastic bag so that they will not get wet. When
washing the vehicle, be careful not to let any
water enter the storage compartments.

NOTICE

ECB02241

To protect from damage, do not put metal
items, like tools, or sharply edged items di-
rectly in the storage compartment. If these
items must be stored, wrap them in appro-
priate cushioning material.

 

1. Unlock.
2. Open.

1

2

1. Storage compartment

1

U2MB7BE0.book  Page 19  Thursday, March 3, 2016  11:46 AM

Содержание WOLVERINE YXE70WPXH



























































































































































































Отзывы:

Нет отзывов