Yamaha WaveRunner SuperJet 2015 страница 32 Скачать руководство пользователя

Страница: 32 / 78

Equipment operation

(2) Unfasten the bands, and then remove

the storage pouch.

To install the storage pouch:
(1) Bend the owner’s/operator’s manual

slightly to insert it into the storage pouch,
and then add the tool kit and any other
small items. Fold the pouch, and then
wrap the strap around it.

(2) Install the storage pouch on the hood

and secure it with the bands.

(3) Securely install the hood in its original

position.

EJU41004

Fire extinguisher container

The fire extinguisher container is located on
the hood.

To open the fire extinguisher container:
(1) Lift the steering pole and support it with

the lock pin.

(2) Grasp the tab, pull the band to the rear,

and then pull it up.

(3) Lift the fire extinguisher container about

30 degrees from the storage position.

NOTICE:

Do not force the fire extin-

guisher container up more than 30 de-
grees from the storage position,
otherwise the container and hood
could be damaged.

[ECJ00402]

Storage pouch

Band

Strap

Steering pole

Lock pin

Fire extinguisher container

Tab

UF4D70E0.book Page 26 Wednesday, May 7, 2014 10:53 AM

Содержание WaveRunner SuperJet 2015















































































Результаты поиска

Содержание WaveRunner SuperJet 2015

Отзывы:

Похожие инструкции для WaveRunner SuperJet 2015

Бренды по названию

Популярные бренды

Yamaha WaveRunner SuperJet 2015, Руководство пользователя

Результаты поиска

Содержание WaveRunner SuperJet 2015

Отзывы:

Похожие инструкции для WaveRunner SuperJet 2015

Бренды по названию

Популярные бренды