Yamaha WaveRunner FX SHO, Руководство по обслуживанию

Страница: 349 / 433

E
ELEC
– +
1
2
3
4
5
6
7
8
9
7-72
Fuel level meter display and fuel level
warning indicator
1. Check:
• Fuel level meter display 1 and fuel level
warning indicator 2
Do not come on
→
Replace the multi-
function meter.
Checking steps:
1. Remove the fuel pump module assembly.
Refer to “ Fuel tank removal ” in Chapter 4.
2. Connect the fuel sender coupler
3
.
3. Lift the float to the upper position
È
.
4. Push the unlock button.
5. Check that all fuel level segments come
on.
6. Lower the float to the lowest position
É
.
7. Check that the fuel level warning indicator
2
, the lowest 2 fuel level segments
4
,
and the “ WARNING ” indicator light
5
blink.
Check engine warning indicator
1. Check:
• Check engine warning indicator
Does not come on
→
Check the “ Diag-
nosis record ” of the YDIS.
Checking steps:
1. Disconnect the engine temperature sensor
coupler
1
.
2. Push the unlock button.
3. Check that the
“ WARNING ” indicator light
2
and the check engine warning indicator
3
begin to blink.
4. If the light and indicator do not blink, check
the “ Diagnosis record ” of the YDIS. If a
diagnosis record is available and it is
caused by the checking steps, replace the
multifunction meter.
2
1
4
5
È
É
3
1
B/O
B/Y
3
2
Indication system