Yamaha VK10A страница 12 Скачать руководство пользователя | Manualshive

Страница: 12 / 92

background image

Safety information

6

be unable to save yourself. Also, deadly lev-
els of carbon monoxide can linger for hours or
days in enclosed or poorly-ventilated areas. If
you experience any symptoms of carbon
monoxide poisoning, leave the area immedi-
ately, get fresh air, and SEEK MEDICAL
TREATMENT.

●

Do not run the engine indoors. Even if you
try to ventilate engine exhaust with fans or
open windows and doors, carbon monoxide
can rapidly reach dangerous levels.

●

Do not run the engine in poorly ventilated or
partially enclosed areas such as barns, ga-
rages, or carports.

●

Do not run the engine outdoors where en-
gine exhaust can be drawn into a building
through openings such as windows and
doors.

Genuine Yamaha Accessories

Choosing accessories for your snowmobile is
an important decision. Genuine Yamaha Ac-
cessories, which are available only from a
Yamaha dealer, have been designed, tested,
and approved by Yamaha for use on your
snowmobile. Many companies with no con-
nection to Yamaha manufacture parts and ac-
cessories or offer other modifications for
Yamaha vehicles. Yamaha is not in a position
to test the products that these aftermarket
companies produce. Therefore, Yamaha can
neither endorse nor recommend the use of
accessories not sold by Yamaha or modifica-
tions not specifically recommended by
Yamaha, even if sold and installed by a
Yamaha dealer.

Maintenance and storage

●

When laying the snowmobile on its side for
maintenance, use a suitable stand to keep
it in a stable and level position.

●

Do not leave the snowmobile on its left side
for an extended period of time. Fuel may
leak out from the fuel breather hose.

●

Do not allow anyone to stand behind the
snowmobile when starting, inspecting, or
adjusting the snowmobile. A broken track,
track fittings, or debris thrown by the track
could be dangerous to the operator or by-
standers.

●

Modifications made to the snowmobile not
approved by Yamaha, or the removal of
original equipment may render your snow-
mobile unsafe for use, which may cause se-
vere personal injury. Modifications may
also make the snowmobile illegal to use.

●

Never store the snowmobile with fuel in the
fuel tank inside a building where ignition
sources are present such as hot water and
space heaters, an open flame, sparks,
clothes dryers, and the like. Allow the en-
gine to cool off before storing the snowmo-
bile in an enclosed space.

U8GS14E0.book Page 6 Wednesday, May 19, 2010 10:45 AM

«
...
10
11
12
13
14
...
»

Содержание VK10A





























































































Отзывы:

Нет отзывов

Похожие инструкции для VK10A

Бренд: Honda Страницы: 29

Бренд: BOMBARDIER Страницы: 20

FORMULA 500 1997

Бренд: Ski-Doo Страницы: 352

Бренд: Suzuki Страницы: 492

Бренд: Whirlwind Страницы: 7

Бренд: Abbey Machinery Страницы: 72

Бренд: Topcon Страницы: 58

Бренд: Fort Страницы: 88

Бренд: GARIA Страницы: 118

Бренд: Parklands Страницы: 66

Бренд: Yamaha Страницы: 98

Бренд: Yamaha Страницы: 192

Бренд: Weber Страницы: 11

Бренд: Subaru Страницы: 1418

Бренд: Cobra Страницы: 47

Бренд: Cobra Страницы: 53

Бренд: Cobra Страницы: 53

Бренд: Cobra Страницы: 65

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды