Yamaha VERSITY 300 VP300 Скачать руководство пользователя | Manualshive

Страница: 40 / 84

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-1

6

EAU17280

Safety is an obligation of the owner. Pe-
riodic inspection, adjustment and lubri-
cation will keep your vehicle in the
safest and most efficient condition pos-
sible. The most important points of in-
spection, adjustment, and lubrication
are explained on the following pages.
The intervals given in the periodic
maintenance and lubrication chart
should be simply considered as a gen-
eral guide under normal riding condi-
tions. However, DEPENDING ON THE
WEATHER, TERRAIN, GEOGRAPHI-
CAL LOCATION, AND INDIVIDUAL
USE, THE MAINTENANCE INTER-
VALS MAY NEED TO BE SHORT-
ENED.

WARNING

EWA10320

If you are not familiar with mainte-
nance work, have a Yamaha dealer
do it for you.

WARNING

EWA10330

This scooter is designed for use on
paved roads only. If this scooter is
operated in abnormally dusty, mud-

dy or wet conditions, the air filter el-
ement should be cleaned or
replaced more frequently, otherwise
rapid engine wear may result. Con-
sult a Yamaha dealer for proper
maintenance intervals.

EAUT1120

Owner’s tool kit

The owner’s tool kit is located inside the
front storage compartment. (See page
3-12.)
The service information included in this
manual and the tools provided in the
owner’s tool kit are intended to assist
you in the performance of preventive
maintenance and minor repairs. How-
ever, additional tools such as a torque
wrench may be necessary to perform
certain maintenance work correctly.

NOTE:

If you do not have the tools or experi-
ence required for a particular job, have
a Yamaha dealer perform it for you.

WARNING

EWA10350

Modifications not approved by
Yamaha may cause loss of perfor-
mance and render the vehicle un-
safe for use. Consult a Yamaha
dealer before attempting any chang-
es.

«
...
38
39
40
41
42
...
»

Содержание VERSITY 300 VP300





















































































Отзывы:

Нет отзывов

Похожие инструкции для VERSITY 300 VP300

Бренд: BANWOOD Страницы: 52

Бренд: Zero Motorcycles Страницы: 142

e-Scooter Series

Бренд: Uebler Страницы: 52

Бренд: Heartway Medical Products Страницы: 33

Бренд: Afikim Страницы: 40

Бренд: Jetson Страницы: 20

Бренд: Yedoo Страницы: 21

Бренд: Hudora Страницы: 8

Бренд: Local Motors Страницы: 41

Бренд: VESPA Страницы: 35

Бренд: Trikke Страницы: 14

Shoprider S-889SL

Бренд: Roma Medical Страницы: 20

Бренд: WESTHILL BIKES Страницы: 20

Бренд: Glide Cruisers Страницы: 14

Бренд: Glide Страницы: 20

Бренд: Scooty Страницы: 20

Disney JUNIOR MICKEY AND THE ROADSTER RACERS...

Бренд: PACIFIC CYCLE Страницы: 7

Бренд: a2b Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды