Yamaha V50, Уполномоченное руководство по продукции

Страница: 85 / 161

Note:
When sending program change messages from the
V50 sequencer to external devices, set the MIDI
function “Program change” setting to “TransFilter”
(see page 101).
As you become more familiar with the sequencer, you
will find other ways to use it. To set the sequencer
transmit channel, see page 90. To set the performance
receive channel, see page 25. To set the basic receive
channel, see page 99.
SYNTHESIZER PREPARATIONS
Before starting to record using the sequencer, make the
following settings to initialize a performance memory
for use with the sequencer.
Note:
If you will be using only one voice with the sequencer,
these preparations are unnecessary.
Since you can specify voices when making se-
quencer recording settings, there is no need to select
each voice after initializing.
When using one to four sequencer tracks
Use the performance initialize function to select “SEQ4”
as the initialization setting.
(1) Press to enter performance play
mode.
(2) Select a performance number.
(3) Press
(4) Press the below “ > Init”.
(5) Press the below “SEQ4”.
(6) Press to initialize the performance for four
tracks.
When using five or more sequencer tracks.
Use the performance initialize function to select “SEQ8”
as the initialization setting.
(1) Press to enter performance play
mode.
(2) Select a performance number.
(3) Press
(4) Press the below “ >Init”.
(5) Press the below “SEQ8”.
(6) Press to initialize the performance for eight
tracks.
80 Using the sequencer