Yamaha V50 Скачать руководство пользователя страница 123

Страница: 123 / 161

Preset load Voice edit

From single play mode, performance play mode, or voice
or performance edit, press

The following

example shows the voice display.)

Press the below “ > PresetLoad” to get the fol-
lowing display.

You can press the below “ > EXIT” to return to
the previous display.

Function

Load the preset performance effects and/or micro

tunings.

Explanation

This loads the preset performance effects settings,
and/or the preset micro tuning settings into internal

user memory.

Select one of the following presets to load.

ALL

Load performance effects and micro tun-

ings.

PEFCT

Load only performance effects.

MCT

Load only micro tunings.

When you press a to select the preset, you will
get a message “Are you sure?”. Press and the
preset will be loaded.

Note:

This function will erase all performance effect and
micro tuning settings in internal user memory.

If internal user memory contains performance

effect and micro tuning settings that you want to keep,
save them to card or disk before using this function.

118

Utility functions

From performance play mode or performance edit,

press to get the following display.

Function

From editing a performance, jump to editing a voice.

Explanation

From performance editing, this allows you to instantly

jump to edit one of the voices in the performance.

Press the below “ > Voice Edit” to get the

following display.

Press a to select the voice you want to edit,
and you will jump to voice editing mode. (However
the upper left of the display will show “M1111”

in-

stead of the usual “E1111”.)

You can repeat this to edit several voices of a

performance at once.

Note:

If you edit a voice using this function and press

before storing the voice, you will get a

message “** go to SGL mode Sure?”. If you now press

the voice being edited will return to the original

data.

If you have edited voice data from this function,

you will be able to individually store the modified
voices (see page 00).

This mode is unlike normal single mode in the

following ways.

(1) EFCT edit and copy
(2) compare mode
(3) operator on/off

If you press a button other than an edit button, you

will return to the above menu.

Note:

If you turn an instrument’s MAX NOTES = 0 while
in multi-voice edit, the sound you are editing will
disappear.

Содержание V50


































































































































































Результаты поиска

Содержание V50

Отзывы:

Похожие инструкции для V50

Бренды по названию

Популярные бренды

Yamaha V50, Уполномоченное руководство по продукции

Результаты поиска

Содержание V50

Отзывы:

Похожие инструкции для V50

Бренды по названию

Популярные бренды