Yamaha V MAX VMX17Y Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 114

background image

INTRODUCTION

EAU10081

Congratulations on your purchase of the Yamaha VMX17Y(C). This model is the result of Yamaha’s vast experience in the
production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and
reliability that have made Yamaha a leader in these fields.
This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle. If you
have any questions concerning the operation or maintenance of your motorcycle, please consult a Yamaha dealer.
The design and manufacture of this Yamaha motorcycle fully comply with the emissions standards for clean air applicable
at the date of manufacture. Yamaha has met these standards without reducing the performance or economy of operation of
the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the
recommended maintenance schedules and operating instructions contained within this manual.
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most cur-
rent product information available at the time of printing, there may be minor discrepancies between your motorcycle and this
manual. If there is any question concerning this manual, please consult a Yamaha dealer.

WARNING

EWA10011

Please read this manual and the “YOU AND YOUR MOTORCYCLE: RIDING TIPS” booklet carefully before operating
this motorcycle. Do not attempt to operate this motorcycle until you have attained adequate knowledge of its con-
trols and operating features. Regular inspections and careful maintenance, along with good operating techniques,

will help ensure that you safely enjoy the capabilities and reliability of this motorcycle.

«
1
2
3
4
5
...
»

Содержание V MAX VMX17Y



















































































































Отзывы:

Нет отзывов

Похожие инструкции для V MAX VMX17Y

Бренд: LAZER Страницы: 13

Бренд: Cannondale Страницы: 102

Бренд: KAYO MOTOR Страницы: 74

Бренд: KAYO MOTO Страницы: 5

Бренд: Caberg Страницы: 3

Бренд: Caberg Страницы: 2

Бренд: Rally Pack Страницы: 2

Бренд: SUOMY Страницы: 84

V-Gard 500 Series

Бренд: MSA Страницы: 2

Бренд: X-lite Страницы: 84

Бренд: Yamaha Страницы: 104

Super Tenere ABS 2018

Бренд: Yamaha Страницы: 122

Бренд: Yamaha Страницы: 124

Бренд: Yamaha Страницы: 97

Бренд: KTM Страницы: 7

Бренд: Shark Страницы: 76

Бренд: hepco & becker Страницы: 3

Бренд: Protos Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды