86
Tyros5 Reference Manual
4
Select the desired Punch In/Out Mode, using the [1
]/[2
] (MODE) buttons.
•
MANUAL
............... This lets you manually execute Punch In/Out recording by using the Audio Recorder/Player
transport buttons ([REC], [PLAY/PAUSE], etc.).
•
PEDAL
.................... This lets you manually execute Punch In/Out recording by using a connected footswitch to
the FOOT PEDAL 2 jack.
•
AUTO
...................... This lets you specify the Punch In and Out points, allowing automatic Punch In/Out record-
ing (see below).
4
Specifying the recording range in AUTO mode
If you select AUTO as the punch in/out recording method, specify the recording range and practice the record-
ing by using the Rehearsal function.
1
Specify the punch in/out range by pressing the [3
]/[5
] (SET) buttons at the punch in/out point
during the audio song playback.
2
If you move the punch in/out point slightly, use the Nudge function.
In this Nudge function, you can move the punch in/out point slightly (even in millisecond units) while
listening to the playback.
2-1
Press the [7
] (NUDGE) button to show the Nudge Play display.
2-2
Use the [DATA ENTRY] dial and AUDIO
RECORDER/PLAYER [PREV]/[NEXT] button to
move the NUDGE DATA POSITION to the desired
punch in/out position while listening to the playback
(500 milliseconds loop playback before/after the speci-
fied point). The [DATA ENTRY] dial lets you adjust the
point in seconds and the [PREV]/[NEXT] buttons lets
you adjust in milliseconds.
2-3
Press the [7
] (MODE) button to select After/Before. “After” repeats 500 milliseconds after
the Nudge Data Position and “Before” repeats 500 milliseconds before the Nudge Data Position
when you playback the data in the next step.
2-4
Press the [3
]/[5
] (SET) button to set the moved point. To reset the point to the start/end
point of the data, press the [4
]/[6
] (RESET) button.
2-5
Press the [8
] (CLOSE) button.
3
Use the REHEARSAL function to practice the recording before the actual recording.
3-1
Press the [8
] (REHEARSAL) button. “EXECUTING” is shown above the [8
] buttons.
3-2
Press the AUDIO RECORDER/PLAYER [REC] button and press the [PLAY/PAUSE] button.
The audio song is played back repeatedly starting four seconds before the punch in point to four
seconds after the punch out point. Play the keyboard or sing the desired part in practice. In this
rehearsal function, recording is not started.
3-3
Press the AUDIO RECORDER/PLAYER [STOP] button.
The smallest possible range of the Auto punch in/out function is 100 milliseconds.
NOTE
Repeat playback of the rehearsal function is automatically stopped after playing back 99 times.
NOTE
NEXT PAGE
