background image

Tyros5  Reference Manual

47

3

Mul
ti Pads – 

Adding Musical Ph

rase

s to
 Y

o

ur 
Pe

rfor

manc

e –

3

If necessary, select the desired Voice with the VOICE category selection buttons.

After selecting the Voice, press the [EXIT] button to return to the previous display.

4

If you want to create a new Multi Pad in an empty new Bank, press the [C] (NEW BANK) 
button. 

5

Select a particular Multi Pad for recording by pressing any of the [A], [B], [F] and [G] but-
tons. 

6

Press the [H] (REC) button to enter recording standby status for the Multi Pad selected 
in step 5.

7

Play the keyboard to start recording. 

If you want to insert silence before the actual phrase, press the STYLE CONTROL [START/STOP] to start both 
the Recording and rhythm playback (of the current Style). Keep in mind that the rhythm part of the current Style 
plays back during recording although it is not recorded. 

Recommended notes for the Chord Match phrase

If you intend to create a Chord Match phrase, use the notes of C, D, E, G, A and B, or in other words, play the 
phrase in the key of C major. This ensures that the phrase will stay harmonically constant and match whichever 
chord you play in the left hand section of the keyboard. 

8

Stop recording.

Press the [H] (STOP) button or the panel MULTI PAD CONTROL [STOP] button or the STYLE CONTROL 
[START/STOP] button to stop recording when you’ve finished playing the phrase.

9

Listen back to your newly recorded phrase, by pressing the appropriate MULTI PAD but-
ton, [1]–[4]. To re-record the phrase, repeat steps 6–8.

10

Turn the Repeat parameter of each pad On or Off by using the [1



]–[4



] buttons.

If the Repeat parameter is on for the selected pad, playback of the corresponding pad will continue until the 
MULTI PAD [STOP] button is pressed. When you press a Multi Pad for which Repeat is turned on during Song or 
Style playback, playback will start and repeat in sync with the beat.
If the Repeat parameter is off for the selected pad, playback will end automatically as soon as the end of the phrase 
is reached.

11

Turn Chord Match of each pad On or Off by using the [5



]–[8



] buttons.

If the Chord Match parameter is on for the selected pad, the corresponding pad is played back according to the 
chord specified in the chord section of the keyboard generated by turning [ACMP] on.

12

Press the [D] (NAME) button, then enter the desired name for each Multi Pad.

13

If you want to record other Multi Pads, repeat steps 5–12.

14

Press the [I] (SAVE) button to save the Multi Pad, then save the Multi Pad data as a Bank 
containing a set of four Pads.

C R C

C R C

C = Chord note
C, R = Recommended note

Содержание Tyros5

























































































































































Отзывы: