Yamaha Tyros5, Справочное руководство

Страница: 136 / 152

136 Tyros5 Reference Manual
In this section, you can make MIDI-related settings for the instrument. The Tyros5
gives you a set of ten pre-programmed templates that let you instantly and easily
reconfigure the instrument to match your particular MIDI application or external
device. Also, you can edit the pre-programmed templates and save up to ten of your
original templates to USER memory.
1
Call up the operation display.
[FUNCTION]

[G] MIDI
2
Select a pre-programmed template from the Preset page ( page 137 ).
If you have already created your original template and saved it to the User page, you can also select that template
from the User page.
3
To edit the template, press the [8

] (EDIT) button to call up the MIDI display.
4
Use the TAB [
E
][
F
] buttons to call up the relevant page, then set various parameters to
edit the current MIDI template.
• SYSTEM
...................MIDI System Settings ( page 138 )
•
TRANSMIT
..............MIDI Transmit Settings ( page 139 )
• RECEIVE
.................MIDI Receive Settings ( page 140 )
• BASS
.........................Bass Note Settings for Style Playback via MIDI Receive ( page 141 )
• CHORD DETECT
....Chord Type Settings for Style Playback via MIDI Receive ( page 141 )
• MFC10
......................Settings for a connected MFC10 MIDI Foot Controller (
page 142
)
5
When you’ve finished editing, press the [EXIT] button to return to the MIDI template
Selection display.
6
Select the User page by using the TAB [
E
][
F
] buttons, then press the [6

] (SAVE) but-
ton to save the edited template.
MIDI Settings
You can save all your original templates
as a single file to internal memory (User
drive) or a USB flash memory: [FUNC-
TION]

[H] UTILITY

TAB [
E
][
F
]
SYSTEM RESET

[G] MIDI SETUP
FILES. See page 132 .
NOTE
3 6
2