8
Tyros4 Reference Manual
Multi Assign Type
The Multi Assign effect automatically assigns notes played simultaneously on the
right-hand section of the keyboard to separate parts (Voices). For example, if you
play three consecutive notes, the first is played by the RIGHT 1 Voice, the second
by the RIGHT 2 Voice, and the third by the RIGHT 3 Voice. The Multi Assign
effect is not affected by the [ACMP] and LEFT part on/off status.
Echo Types
When one of the Echo Types is selected, the corresponding effect (echo, tremolo,
trill) is applied to the note played in the right-hand section of the keyboard in time
with the currently set tempo, regardless of the [ACMP] and the LEFT part on/off
status. Keep in mind that Trill works when you hold down two notes on the key-
board simultaneously (last two notes if more than two notes are held), and it plays
those notes alternately.
4
Use the [4
]–[8
] buttons to select various Harmony/
Echo settings.
The available settings differ depending on the Harmony/Echo type.
[4
]
VOLUME
This parameter is available for all types with the exception of “Multi Assign.” It deter-
mines the level of the harmony/echo notes generated by the Harmony/Echo effect.
[5
]
SPEED
This parameter is only available when Echo, Tremolo, or Trill is selected in Type
above. It determines the speed of the Echo, Tremolo, and Trill effects.
[6
]
ASSIGN
This parameter is available for all types with the exception of “Multi Assign.” This
lets you determine the keyboard part via which the harmony/echo notes will be
sounded.
[7
]
CHORD NOTE
ONLY
This parameter is available when one of the Harmony Types is selected. When this is
set to “ON,” the Harmony effect is applied only to the note (played in the right-hand
section of the keyboard) that belongs to a chord played in the chord section of the key-
board.
[8
]
TOUCH LIMIT
This parameter is available for all types with the exception of “Multi Assign.” It deter-
mines the lowest velocity value at which the harmony note will sound. This allows
you to selectively apply the harmony by your playing strength, letting you create har-
mony accents in the melody. The harmony effect is applied when you play the key
strongly (above the set value).
