48
Tyros4 Reference Manual
Editing Data for Each Channel
1
In the CHANNEL Page, use the [A]/[B] buttons to select the edit
menu.
1 QUANTIZE
Same as in the Song Creator (
), with the exception of the two additional available parameters below.
2 VELOCITY CHANGE
Boosts or cuts the velocity of all notes in the specified channel, according to the percentage specified here.
3 BAR COPY
This function allows data to be copied from one measure or group of measures to another location within the spec-
ified channel.
4 BAR CLEAR
This function clears all data from the specified range of measures within the selected channel.
5 REMOVE EVENT
This function lets you remove specific events from the selected channel.
2
Use the [1
]/[2
] (CHANNEL) buttons to select the chan-
nel to be edited.
The selected channel is shown at the upper left of the display.
3
Use the [4
]–[8
] buttons to edit the data.
4
Press the [D] (EXECUTE) button to actually enter the edits for
each display.
After the operation is completed, this button changes to “UNDO,” letting you
restore the original data if you are not satisfied with the results of the edit. The
Undo function only has one level; only the previous operation can be undone.
5
Press the [I] (SAVE) button to execute the Save operation.
5
2
3
1
4
Eighth notes with swing
Sixteenth notes with swing
[4
]
TOP
Specifies the first (TOP) and last (LAST) measures in the region to be copied.
[5
]
LAST
[6
]
DEST
Specifies the first measure of the destination location, to which the data is to be copied.
The edited Style will be lost if you
change to another Style or turn
the power to the instrument off
without executing the Save opera-
tion.
NOTICE