8
8
M
ixing C
onsole – E
diting the
V
olume and
T
onal B
alance –
Tyros3 Reference Manual •
97
Editing and Saving the Selected EQ
1
Press the [F] (EDIT) button in the EQ Page of the Mixing Console dis-
play.
The MASTER EQ EDIT display is called up.
2
Use the [A]/[B] buttons to select a preset EQ type.
The set parameters of the selected EQ type are automatically shown at the bot-
tom of the display.
3
Use the [3
▲▼
]–[7
▲▼
] buttons or sliders to boost or cut each of the
five bands.
Use the [8
▲▼
] buttons to boost or cut all the five bands at the same time.
4
Adjust the Q (bandwidth) and the FREQ (center frequency) of the
band selected in step 3.
To adjust the bandwidth (also called “Shape” or “Q”), use the [1
▲▼
] buttons
or slider. The higher the value of Q, the narrower the band width.
To adjust the FREQ (center frequency), use the [2
▲▼
] buttons or slider. The
available FREQ range is different for each band.
5
Press the [H] or [I] (STORE 1 or 2) button to save the edited EQ type.
Up to two types of EQ can be created and saved. When recalling the saved EQ
type, use the same procedure as in step 2.
3
5
2
4
Содержание Tyros3
Страница 1: ...EN Reference Manual ...