MIDI
Reference
148
TYROS Owner’s Manual
146
Setting the Chord Root for Style Playback via MIDI receive
The explanations here apply when you call up the ROOT page in step #5 of the Basic Procedure on page 145. These settings let
you determine the chord root for style playback, based on the note messages received via MIDI.
The note on/off messages received at the channel(s) set to “ON” are recognized as the root notes in the chord section. The root
notes will be detected regardless of the [ACMP] on/off and split point settings. When several channels are simultaneously set to
“ON,” the root note is detected from merged MIDI data received over the channels.
Setting the Chord Type for Style Playback via MIDI receive
The explanations here apply when you call up the CHORD DETECT page in step #5 of the Basic Procedure on page 145. These
settings let you determine the chord type for style playback, based on the note messages received via MIDI.
The note on/off messages received at the channel(s) set to “ON” are recognized as the chord notes in the chord section. The chords
to be detected depend on the fingering type. The chord types will be detected regardless of the [ACMP] on/off and split point
settings. When several channels are simultaneously set to “ON,” the chord type is detected from merged MIDI data received over
the channels.
The operation procedure is basically the same as that of the ROOT display above.
MFC10 Settings
The explanations here apply when you call up the MFC10 page in step #5 of the Basic Procedure on page 145.
By connecting an optional MFC10 MIDI Foot Controller to the TYROS, you can conveniently control a wide range of operations
and functions by using your feet — perfect for changing settings and controlling the sound while you perform live. Different
functions can be assigned to each of the footswitches and up to five foot controllers (optional) can be connected to the MFC10,
for additional sound-shaping possibilities.
To assign the desired functions to the appropriate footswitches/foot controllers on the TYROS, select [FUNCTION]
→
MIDI
→
EDIT
→
MFC10. Two settings (below) can be made from this display.
• Each footswitch (F00 - F29) on the MFC10 sends a note number to the TYROS, and the TYROS determines how it responds
to (which function is executed by) that note number.
• Each foot controller on the MFC10 sends control change messages over a specific control change number to the TYROS,
and the TYROS determines how it responds to (which parameter is changed by) that control change number.
1
Connect the MIDI IN terminal of the MFC10 to one of the MIDI OUT terminals of the
TYROS by using a MIDI cable.
Sets all channels to
OFF.
Sets the desired channel to ON or OFF.
Selects the channels in
groups of eight.
MIDI OUT
MIDI IN
MFC10
If desired, connect
additional foot control-
lers to the MFC10.
• Do not connect the MIDI
OUT terminal of the
MFC10 to the MIDI IN of
the TYROS in this step.
Содержание TYROS
Страница 1: ......